What are the filter element materials?

Filters play a very important role in the use process. In order to achieve better results, the material must be selected correctly. The following small series will introduce to you what the filter element material is.

What are the filter element materials

1. The material used for the coarse filter is non-woven fabric, as well as metal wire.

2. If the medium-efficiency filter is made of synthetic fiber felt, etc., the pores will be smaller.

3. If the material used in the high-efficiency filter is microfiber filter paper, it can be said that its pores are also very small, allowing the air to pass through at a low filtration rate and making the purification more thorough.

What are the details of the use of pre-filters?

1. Before installation, it is strictly forbidden to open the package. During installation, the filter should be properly stored according to relevant requirements. In the process of handling the filter, it is also necessary to handle the filter with care, and it is not possible to produce a relatively large filter. The impact and vibration of the filter are not easy to cause damage to the filter.

2. The transportation and installation of the pre-filter should also be carried out according to the requirements, so as to ensure that it will not cause a lot of trouble during installation and use, and the surface layer of the filter material will also accumulate after a period of use. Too many stains should be cleaned up at this time.

3. If it is used in an environment with high humidity and temperature, the selected model also has high temperature resistance and high humidity resistance. It must meet the requirements before it can be used. If it is used in a medical clean room, it must also have a metal frame. Body filter to prevent a rust condition on the surface.

4. If it is before and after the filter, during the installation process, it is also necessary to pay attention to the value of the pressure difference. For coarse-efficiency filters, when the pressure difference reaches more than 250pa, it must be replaced. For medium-efficiency filters, its value cannot be greater than 330pa.

Summary: The relevant content about the material of the filter element is introduced here. It depends on what kind of filter it is, and the materials used are different, so you must understand it clearly before using it.